You want parts to move in a straight line. You want them to move fast. You want them to stop on a dime. You want them to last. I help you do that with track linear actuators.
I am Jimi Technology Co., Ltd. I make high‑quality linear actuators, Ascenseurs TV, et systèmes d'automatisation. My products turn énergie électrique en mouvement linéaire. You tap a button. The unit will raise. It will lower. It will push. It will pull. It will tilt. I do more than sell. I guide you. I build custom motion control solutions. I am a trusted expert et authority dans automatisation industrielle et contrôle des mouvements.
What is a Track Linear Actuator?
UN track linear actuator is a smart rail with a moving carriage. A motor turns. The drive makes the carriage slide on a guide rail. The load sits on the carriage. The load moves in a line. This is mouvement linéaire.
It is not a rod that goes in and out. It is a rodless linear actuator on a track. You get long longueur de la course. Vous obtenez précision. Vous obtenez répétabilité.
実績のある、信頼性が高く、長寿命のアクチュエータ。
- Motor makes spin. Spin makes slide.
- Vous pouvez utiliser un moteur pas à pas, a servomoteur, a Moteur à courant continuou un AC motor.
- Le drive mechanism can be:
- Ball screw for high efficiency, fine précisionet de grandes load capacity.
- Lead screw pour self‑locking hold and low cost.
- Belt drive pour high speed and long travel.
- Linear bearings et profile rail guides keep motion smooth.
- Interrupteurs de fin de course and an encodeur help the contrôleur stop in the right spot.
- UN PLC ou IHM can run the unit. You can add a brake motor, coupling, ou gearbox if you need more control.
- Protective covers et wipers keep dust out.
Think of it like a train. The motor is the engine. The track is the linear motion guide rail. The car is the carriage. It runs straight. It runs true.
Les types que vous pouvez choisir
- By drive:
- Ball screw track actuators
- Lead screw track actuators
- Belt driven track actuators
- By setup:
- Single‑axis linear stages
- Multi‑axis gantry systems comme XY ou XYZ linear stage
- Rodless et supported rod‑style track versions
- By place:
- Industrial standard
- Salle blanche utiliser
- Harsh environment avec Indice de protection IP et waterproof conception
I also build linear motor actuators for ultra smooth moves. I offer compact et miniature sizes. I support long stroke et high speed besoins.
Key Parts and Features
- Moteurs: Stepper, servo, brushless DC, ou DC
- Drive trains: vis à bille, vis-mère, belt, et boîtes de vitesses
- Guides: profile rails, round rails, et integrated guides
- Carriage: the flat top where you mount the load
- Capteurs : encodeurs, interrupteurs de fin de course, et Hall sensors
- Contrôles : PLC, contrôleur, et IHM screens
- Extras: protective bellows, wipers, et structural aluminum extrusions
- Options: actuator encoder feedback, actuator synchronisation, et brake motor actuator
Why Use Track Linear Actuators
- High precision and repeatability. Hit the mark again and again.
- Strong load handling. Take axial, radial, et moment loads with ease.
- Long stroke. Travel short or travel very far.
- Space‑efficient design. Rodless saves length.
- Durable build for automatisation industrielle et environnements difficiles.
- Easy to integrate with your control system.
- Energy efficient contre pneumatique ou hydraulique.
I design for cycle de service needs. I size for actuator speed control. I hit your actuator technical specifications. I match your actuator dimensions et options de montage. I plan your actuator maintenance et lubrification.
Where You Can Use Them
- Industrial automation actuator jobs: pick and place, assembly, welding, dispensing
- Robotique: gantry robot, Cartesian robots, mechatronics linear systems
- Dispositifs médicaux and lab: imaging, fluid handling
- Packaging industry: sorting, palletizing
- Material handling actuator tasks
- Solar tracking actuator systems
- Automobile build lines
- Aérospatiale tools and tests
- Ergonomic furniture like desks and lifts
- AGV et conveyor systems linear motion
- Inspection automation, dispensing automation, et factory automation linear
Need a desk to go up and down. I use ergonomic desk actuator et colonnes de levage. Need a patient lift actuator. I build it. Need valve automation actuator. I do that too.
Des données fiables
I test. I measure. I share what you can expect.
Table: Typical Performance and Market Signals
| Topic | Data | Ce que cela signifie |
|---|---|---|
| Croissance du marché | Linear motion systems may reach $10–12B by 2029 at 6–8% CAGR | Demand grows as more plants automate |
| Load capacity | From 50 N to 100,000 N+ | Scale from tiny to huge |
| Gamme de vitesse | Ball screw up to 1.5 m/s. Belt up to 15 m/s. Lead screw up to 0.8 m/s | Pick your drive to fit speed and stroke |
| Précision | Ball screw ±0.01–0.05 mm. Belt ±0.05–0.2 mm | Ball screw gives finer stop points |
| Efficacité énergétique | Electric 80–90% vs pneumatic 10–30% vs hydraulic 50–70% | You can save power and cost |
| Life | Ball screw L10 often 20,000 km of travel | Long life with right load and lube |
Simple chart: Drive vs Speed
- Ball screw: |||||||||| (up to 1.5 m/s)
- Belt drive: |||||||||||||||||||||||||| (up to 15 m/s)
- Lead screw: |||||||| (up to 0.8 m/s)
Real Results
- Case 1. A pill line used belt driven track linear actuators. Output went up 25%. Errors went down 90%. Clean and safe.
- Case 2. A solar farm used heavy‑duty units with Indice de protection IP. Power per day rose by 25%. Units ran from −20°C to +50°C.
- Case 3. An aircraft plant used a multi‑axis gantry avec ball screw track actuators. Build time fell by 18%. Précision de positionnement hit ±0.02 mm.
What You Need. What I Do.
You need clear steps. You need a fit that works on day one.
- Load. I check statique, dynamique, et moment loads. I size the actuator load capacity.
- Speed. I set speed & acceleration to meet your motion profile.
- Stroke. I match your longueur de la course.
- Accuracy. I hit the accuracy & repeatability you ask for.
- Duty. I set the cycle de service vous avez besoin.
- Place. I pick IP rated linear actuators for outdoor or cleanroom linear actuator units for labs.
- Control. I link with your PLC, PC, or a stand‑alone contrôleur. I add IHM if you want it.
- Cost. I weigh buy price vs life cost. I keep it lean.
- Space. I plan actuator mounting options et orientation.
I compare for you too. I show linear actuator vs pneumatic. I show linear actuator vs hydraulic. You pick the best linear motion technology for your job.
Quick Install and Care
- Align the track and base
- Torque the bolts to spec
- Set limit switch ends
- Home the encodeur
- Lube the vis à bille ou linear bearings by schedule
- Check belts for wear
- Watch for heat or noise
- Utiliser protective covers if dust or splash
If you need help I give you an actuator installation guide, actuator troubleshooting, and service tips.
The Road Ahead
- Industrie 4.0 links with IoT for maintenance prédictive
- Smart control with better IHM et contrôleur tools
- Miniaturization and higher densité de puissance
- Sustainable design and lower power use
I build for now. I design for next.
Pourquoi Jimi
- I am a principal fournisseur de electric linear motion. I make actionneurs linéaires industriels, heavy‑duty linear motion, et precision linear actuator systèmes.
- Je construis custom linear actuator units as needed. I support linear actuator manufacturers et suppliers dans le monde entier.
- I know mechanical linear actuation et mechatronics linear systems. Je soutiens robotics linear motion, medical device actuator needs, packaging machinery actuator lines, material handling actuator tasks, solar tracking actuator fields, automotive assembly actuator tools, aerospace linear motionet bien d'autres choses encore.
- Je soutiens actuator control system design. I deliver actuator encoder feedback et limit switch actuator safety. I can add potentiomètre if needed.
- I stock linear bearings system, profile rail linear guide, round rail linear guide, et carriage for linear actuator parts. I also supply end effector mounting kits, structural aluminum extrusions, supports de montage, les blocs d'alimentation, interrupteurs et télécommandes, et contrôleurs d'actionneurs.
If you want fast. I ship high speed linear actuator units. If you want quiet. I ship actionneurs linéaires silencieux. If you need actionneurs en acier inoxydable ou actionneurs linéaires étanches for a washdown line I can do that too. I also support DIY projects & robotics linear actuators for teaching and labs. I speak to manufacturing industry, packaging industry, dispositifs médicaux, aérospatial, automobile, solar tracking, agriculture, ergonomic furniture, patient lifts, valve actuation, salle blanche, et environnements difficiles teams each week.
Pick Your Path Now
- See my full line of track systems and get CAD at my page for precision track linear actuators: high‑precision track actuators for automation.
- Need closed‑loop power. See my actionneurs de servomoteur: industrial servo motor linear actuators.
- Want fine stop points. See my actionneurs à vis à billes: high‑accuracy ball screw linear actuators.
- Planning a long‑stroke rail. See my guides et rails linéaires: profile and round linear guides and rails.
I guide you on actuator selection criteria. I supply actuator technical specifications et actuator dimensions. I help you set actuator speed control et actuator synchronisation for two or more axes. I share linear actuator design guide notes. I help with linear actuator pricing. I explain the linear actuator benefits, advantages, et drawbacks so you make the right call. I keep your linear actuator maintenance simple.
You can add kits avec télécommande. You can pick actionneurs standard/en ligne, light‑duty / miniature actuators, medium‑duty linear actuators, ou heavy‑duty linear actuators. You can pick actionneurs avec retour de position. You can use vérins électriques if you want a rod type. You can compare actionneurs linéaires hydrauliques et pneumatic linear actuators with my team. You can set up reciprocating cycle actuators. You can deploy in automatisation industrielle, Automatisation des véhicules de loisirs et des bateaux, suivi des panneaux solaires, et bureaux debout et ergonomie aussi.
Quick Table: Choose the Right Drive
| Besoin | Best Drive | Why |
|---|---|---|
| Ultra precision | Ball screw | Tight accuracy and repeatability |
| Long stroke at speed | Belt drive | High speed and quiet |
| Hold without power | Lead screw | Self‑locking and simple |
| Clean room | Ball screw with seals | Low particle and protected |
| Dust or splash | Belt with covers and IP seals | Easy to shield |
Final Word
You want smooth linear motion. You want it safe. You want it now. I bring you track linear actuators that are précis, fort, rapide, et efficace. I back you with expérience et support. I build what you need to raise, lower, push, pull, or tilt at the touch of a button. Let’s move your world on a straight line.
Références
- Bosch Rexroth. Linear Motion Technology Catalog. Accessed 2024.
- Thomson Industries. Ball Screw and Linear Guide Handbook. Accessed 2024.
- Parker Hannifin. Electromechanical Systems Design Guide. Accessed 2024.
- igus. DryLin Linear Guides Technical Data. Accessed 2024.
- Linak. Electric Linear Actuation in Industry. Accessed 2024.
